Scotty Cameron Phantom 5.2, Watermelon
Watermelon, with an Augusta vibe. 34 inches.
$775
Secure checkout through Square · Ships nationwide
This one is a watermelon with an Augusta vibe. Deep green over the body, and that soft pink cut clean through the face. Green like the back nine in April, pink like the fruit when you open one up on a hot day. From three feet away it reads as summer. Then you stand over it, and it is a golf club again.
The colour is the whole idea. A deep watermelon green carries the body, the neck and the hosel, and the pink runs through the face and out along the sole flanges, so the two meet only where the eye already expects a seam. Holding that line clean, at that scale, is most of the work.
Every coat went on by hand, over a head stripped and prepped first, then sealed under a tour-grade clear coat. Hand-applied colour is why it looks like this, and it is also why it cannot be made twice. There is one, and this is it.
Underneath the paint it is a proper tour putter. Cameron built the 5.2 from tour player feedback as a compact wingback mallet that frames the ball at address, with milled topline sight dots for alignment and a plumbing neck giving medium toe flow, suited to a slightly arcing stroke. The idea is a putter that performs like a mallet while keeping the feel, setup and alignment cues of a blade. The 2026 model carries a full-face Studio Carbon Steel insert with Chainlink milling, and a flattened sole with more surface area so it sits the same way on any slope.
Nothing that matters to the putt was touched. The face milling and the markings that identify the club are exactly as Cameron made them, so what arrives is an art piece you can put straight in the bag and roll on Saturday.
The finish
- Watermelon green body, neck and hosel
- Pink face and sole flange accents
- Face milling and identification markings untouched
- Sealed under a tour-grade clear coat
Specification
- Model
- Scotty Cameron Phantom 5.2 (2026)
- Head
- Compact wingback mallet
- Face
- Full-face Studio Carbon Steel insert, Chainlink milling
- Sole
- Flattened, increased surface area
- Neck
- Plumbing neck, moderate toe flow
- Loft
- 3.5°
- Lie
- 70°
- Length
- 34"
- Alignment
- Milled topline sight dots
- Edition
- One-of-one
- Condition
- New, refinished by the studio
- Availability
- One only
- Ships
- Nationwide, headcover included
